This is an old revision of the document!
Cisco : PAT/ NAT Overload [U]
Desciption
Syntax
Some acction
| Command | Description |
|---|---|
S1(config)#vlan [vlan-ID] | Membuat VLAN baru dan menetapkan nomor VLAN |
S1(config-vlan)#name [name] | Memberikan nama pada VLAN |
Contoh:
vlan 10 name VLAN-10 vlan 20 name VLAN-20 vlan 99 name VLAN-Management
Topologi
Gambar topology Goals Topology
Konfigurasi
- Step 1 : Pembuatan VLANs
Switch(config)#vlan 10 Switch(config-vlan)#name BIRU Switch(config-vlan)#exit Switch(config)#vlan 20 Switch(config-vlan)#name MAGENTA Switch(config-vlan)#exit
- Step 2 : Assign VLANs ke Ports
Switch(config)#interface f0/1 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10 Switch(config-if)#exit Switch(config)#interface f0/2 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10 Switch(config-if)#exit