Differences

This shows you the differences between two versions of the page.

--- networking:cisco:ripv2 [2026/02/04 15:12] – [RIPv1 configuration] ilyasa
+++ networking:cisco:ripv2 [2026/02/04 15:28] (current) – [Testing] ilyasa
@@ Line 19: / Line 19: @@
 Karena itu, jaringan Anda pada skema RIPv1 %%**%% HARUS KONSISTEN%%**%%, yang berarti bahwa VLSM atau supernetting tidak didukung oleh RIP versi 1
 </WRAP>
+==== RIPv2 configuration ====
+^Command                                  ^Description                             ^
+|''%%R1(config)#router rip%%''            |masuk ke mode routing dengan rip sebagai|
+|''%%R1(config-router)#version 2%%''      |Mengubah versi RIPv1 mennjadi RIPv2     |
+|''%%R1(config-router)#no auto-summary%%''|disable network auto summarization      |
 ===== Topologi =====
-Gambar topology
+{{ :networking:cisco:cisco_template_routing_rev.png?nolink |}}
-Goals Topology
+<hidden Konfigurasi IP>
-===== Konfigurasi =====
+Setting IP address pada Interface
-  * **Step 1 : Pembuatan VLANs**
+* **R1**
-<code>
+<code js>
-Switch(config)#vlan 10
+R1(config)#interface FastEthernet0/0
-Switch(config-vlan)#name BIRU
+R1(config-if)#ip address 192.168.1.1 255.255.255.0
-Switch(config-vlan)#exit
+R1(config-if)#no shutdown
+R1(config-if)#exit
+R1(config)#interface Serial0/0/0
+R1(config-if)#ip address 10.0.1.1 255.255.255.252
+R1(config-if)#no shutdown
+R1(config-if)#exit
+R1(config)#interface Serial0/1/0
+R1(config-if)#ip address 10.0.0.1 255.255.255.252
+R1(config-if)#no shutdown
+R1(config-if)#exit
+</code>
+* **R2**
+<code js>
+R2(config)#interface FastEthernet0/0
+R2(config-if)#ip address 192.168.2.1 255.255.255.0
+R2(config-if)#no shutdown
+R2(config-if)#exit
+R2(config)#interface Serial0/0/0
+R2(config-if)#ip address 10.0.2.1 255.255.255.252
+R2(config-if)#no shutdown
+R2(config-if)#exit
+R2(config)#interface Serial0/1/0
+R2(config-if)#ip address 10.0.0.2 255.255.255.252
+R2(config-if)#no shutdown
+</code>
+* **R3**
+<code js>
+R3(config)#interface FastEthernet0/0
+R3(config-if)#ip address 192.168.3.1 255.255.255.0
+R3(config-if)#no shutdown
+R3(config-if)#exit
+R3(config)#interface Serial0/0/0
+R3(config-if)#ip address 10.0.2.2 255.255.255.252
+R3(config-if)#no shutdown
+R3(config-if)#exit
+R3(config)#interface Serial0/1/0
+R3(config-if)#ip address 10.0.1.2 255.255.255.252
+R3(config-if)#no shutdown
+</code>
+* **PCs**
+{{ :networking:cisco:cisco_pcsetip.png?nolink |}}
+^PC ^IP ^Address ^Subnet Mask ^Gateway
+| PC1 | 192.168.1.2 | 255.255.255.0 | 192.168.1.1 |
+| PC2 | 192.168.2.2 | 255.255.255.0 | 192.168.2.1 |
+| PC3 | 192.168.3.2 | 255.255.255.0 | 192.168.3.1 |
-Switch(config)#vlan 20
+</hidden>
-Switch(config-vlan)#name MAGENTA
-Switch(config-vlan)#exit
+Hubungkan semua segment jaringan dengan rip
+===== Konfigurasi =====
+  * **R1 : Konfigurasi Routing RIP**
+<code js>
+R1(config)#router rip
+R1(config-router)#version 2
+R1(config-router)#no auto-summary
+R1(config-router)#network 192.168.1.0
+R1(config-router)#network 10.0.0.0
+R1(config-router)#network 10.0.1.0
+R1(config-router)#passive-interface f0/0
+</code>
+  * **R2 : Konfigurasi Routing RIP**
+<code js>
+R2(config)#router rip
+R2(config-router)#version 2
+R2(config-router)#no auto-summary
+R2(config-router)#network 192.168.2.0
+R2(config-router)#network 10.0.0.0
+R2(config-router)#network 10.0.2.0
+R2(config-router)#passive-interface f0/0
 </code>
-  * **Step 2 : Assign VLANs ke Ports**
-<code>
-Switch(config)#interface f0/1
-Switch(config-if)#switchport mode access
-Switch(config-if)#switchport access vlan 10
-Switch(config-if)#exit
-Switch(config)#interface f0/2
+  * **R3 : Konfigurasi Routing RIP**
-Switch(config-if)#switchport mode access
+<code js>
-Switch(config-if)#switchport access vlan 10
+R3(config)#router rip
-Switch(config-if)#exit
+R3(config-router)#version 2
+R3(config-router)#no auto-summary
+R3(config-router)#network 192.168.3.0
+R3(config-router)#network 10.0.2.0
+R3(config-router)#network 10.0.1.0
+R3(config-router)#passive-interface f0/0
 </code>
 ===== Testing =====
+* **Table Routing R1**
+<code js>
+R1#show ip route
+Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
+       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
+       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
+       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
+       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
+       * - candidate default, U - per-user static route, o - ODR
+       P - periodic downloaded static route
+Gateway of last resort is not set
+.0.0.0/30 is subnetted, 3 subnets
+C       10.0.0.0 is directly connected, Serial0/1/0
+C       10.0.1.0 is directly connected, Serial0/0/0
+R       10.0.2.0 [120/1] via 10.0.0.2, 00:00:26, Serial0/1/0
+                 [120/1] via 10.0.1.2, 00:00:21, Serial0/0/0
+C    192.168.1.0/24 is directly connected, FastEthernet0/0
+R    192.168.2.0/24 [120/1] via 10.0.0.2, 00:00:26, Serial0/1/0
+R    192.168.3.0/24 [120/1] via 10.0.1.2, 00:00:21, Serial0/0/0
+</code>
+* **Table Routing R2**
+<code js>
+R2#show ip route
+Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
+       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
+       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
+       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
+       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
+       * - candidate default, U - per-user static route, o - ODR
+       P - periodic downloaded static route
+Gateway of last resort is not set
+.0.0.0/30 is subnetted, 3 subnets
+C       10.0.0.0 is directly connected, Serial0/1/0
+R       10.0.1.0 [120/1] via 10.0.0.1, 00:00:13, Serial0/1/0
+                 [120/1] via 10.0.2.2, 00:00:22, Serial0/0/0
+C       10.0.2.0 is directly connected, Serial0/0/0
+R    192.168.1.0/24 [120/1] via 10.0.0.1, 00:00:13, Serial0/1/0
+C    192.168.2.0/24 is directly connected, FastEthernet0/0
+R    192.168.3.0/24 [120/1] via 10.0.2.2, 00:00:22, Serial0/0/0
+</code>
+* **Table Routing R3**
+<code js>
+R3#show ip route
+Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
+       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
+       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
+       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
+       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
+       * - candidate default, U - per-user static route, o - ODR
+       P - periodic downloaded static route
+Gateway of last resort is not set
+.0.0.0/30 is subnetted, 3 subnets
+R       10.0.0.0 [120/1] via 10.0.1.1, 00:00:16, Serial0/1/0
+                 [120/1] via 10.0.2.1, 00:00:03, Serial0/0/0
+C       10.0.1.0 is directly connected, Serial0/1/0
+C       10.0.2.0 is directly connected, Serial0/0/0
+R    192.168.1.0/24 [120/1] via 10.0.1.1, 00:00:16, Serial0/1/0
+R    192.168.2.0/24 [120/1] via 10.0.2.1, 00:00:03, Serial0/0/0
+C    192.168.3.0/24 is directly connected, FastEthernet0/0
+</code>
+* **Test Ping**
+<code js>
+C:\>ping 192.168.2.2
+Pinging 192.168.2.2 with 32 bytes of data:
+Request timed out.
+Reply from 192.168.2.2: bytes=32 time=16ms TTL=126
+Reply from 192.168.2.2: bytes=32 time=23ms TTL=126
+Reply from 192.168.2.2: bytes=32 time=11ms TTL=126
+Ping statistics for 192.168.2.2:
+    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
+Approximate round trip times in milli-seconds:
+    Minimum = 11ms, Maximum = 23ms, Average = 16ms
+C:\>ping 192.168.3.2
+Pinging 192.168.3.2 with 32 bytes of data:
+Request timed out.
+Reply from 192.168.3.2: bytes=32 time=22ms TTL=126
+Reply from 192.168.3.2: bytes=32 time=15ms TTL=126
+Reply from 192.168.3.2: bytes=32 time=22ms TTL=126
+Ping statistics for 192.168.3.2:
+    Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
+Approximate round trip times in milli-seconds:
+    Minimum = 15ms, Maximum = 22ms, Average = 19ms
+</code>