Differences

This shows you the differences between two versions of the page.

--- networking:cisco:lab-3-lantai [2026/01/27 17:42] – [SW1] ilyasa
+++ networking:cisco:lab-3-lantai [2026/02/01 21:08] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-{{indexmenu_n>001}}
+{{indexmenu_n>101}}
 ====== Cisco Labs : Gedung Berlantai 3 Secenario ======
@@ Line 62: / Line 62: @@
 </code>
-==== SW1 ====
+==== SW3 ====
 <code>
 // vlan2
-SW1(config)#vlan 2
+SW3(config)#vlan 2
-SW1(config-vlan)#name Dept-A
+SW3(config-vlan)#name Dept-A
-SW1(config)#interface range f0/1-5
+SW3(config)#interface range f0/1-5
-SW1(config-if-range)#switchport mode access
+SW3(config-if-range)#switchport mode access
-SW1(config-if-range)#switchport access vlan 2
+SW3(config-if-range)#switchport access vlan 2
 // vlan3
-SW1(config)#vlan 3
+SW3(config)#vlan 3
-SW1(config-vlan)#name Dept-B
+SW3(config-vlan)#name Dept-B
-SW1(config)#interface range f0/6-10
+SW3(config)#interface range f0/6-10
-SW1(config-if-range)#switchport mode access
+SW3(config-if-range)#switchport mode access
-SW1(config-if-range)#switchport access vlan 3
+SW3(config-if-range)#switchport access vlan 3
 // vlan4
-SW1(config)#vlan 4
+SW3(config)#vlan 4
-SW1(config-vlan)#name Dept-C
+SW3(config-vlan)#name Dept-C
-SW1(config)#interface range f0/11-15
+SW3(config)#interface range f0/11-15
-SW1(config-if-range)#switchport mode access
+SW3(config-if-range)#switchport mode access
-SW1(config-if-range)#switchport access vlan 4
+SW3(config-if-range)#switchport access vlan 4
 // trunk
-SW1(config)#interface g0/1
+SW3(config-if)#int g0/1
-SW1(config-if)#switchport mode trunk
+SW3(config-if)#switchport mode trunk
-SW1(config-if)#switchport trunk allowed vlan 2,3,4
+SW3(config-if)#switchport trunk allowed vlan 2,3,4
+SW3(config)#interface g0/2
+SW3(config-if)#switchport mode trunk
+SW3(config-if)#switchport trunk allowed vlan 2,3,4
 </code>
-==== SW1 ====
+==== R1 ROAS ====
 <code>
-// vlan2
+// trunk gateaway
-SW1(config)#vlan 2
+R1(config)#interface g0/0.2
-SW1(config-vlan)#name Dept-A
+R1(config-subif)#encapsulation dot1Q 2
-SW1(config)#interface range f0/1-5
+R1(config-subif)#ip address 192.168.2.1 255.255.255.0
-SW1(config-if-range)#switchport mode access
+R1(config)#interface g0/0.3
-SW1(config-if-range)#switchport access vlan 2
+R1(config-subif)#encapsulation dot1Q 3
-// vlan3
+R1(config-subif)#ip address 192.168.3.1 255.255.255.0
-SW1(config)#vlan 3
+R1(config)#interface g0/0.4
-SW1(config-vlan)#name Dept-B
+R1(config-subif)#encapsulation dot1Q 4
-SW1(config)#interface range f0/6-10
+R1(config-subif)#ip address 192.168.4.1 255.255.255.0
-SW1(config-if-range)#switchport mode access
-SW1(config-if-range)#switchport access vlan 3
-// vlan4
+// DHCP vlan2
-SW1(config)#vlan 4
+R1(config)#service dhcp
-SW1(config-vlan)#name Dept-C
+R1(config)#ip dhcp pool Dept-A
-SW1(config)#interface range f0/11-15
+R1(dhcp-config)#network 192.168.2.0 255.255.255.0
-SW1(config-if-range)#switchport mode access
+R1(dhcp-config)#default-router 192.168.2.1
-SW1(config-if-range)#switchport access vlan 4
+R1(dhcp-config)#dns-server 8.8.8.8
-// trunk
+R1(dhcp-config)#exit
-SW1(config)#interface g0/1
+R1(config)#ip dhcp excluded-address 192.168.2.1 192.168.2.10
-SW1(config-if)#switchport mode trunk
-SW1(config-if)#switchport trunk allowed vlan 2,3,4
+// DHCP vlan3
+R1(config)#service dhcp
+R1(config)#ip dhcp pool Dept-B
+R1(dhcp-config)#network 192.168.3.0 255.255.255.0
+R1(dhcp-config)#default-router 192.168.3.1
+R1(dhcp-config)#dns-server 8.8.8.8
+R1(dhcp-config)#exit
+R1(config)#ip dhcp excluded-address 192.168.3.1 192.168.3.10
+// DHCP vlan4
+R1(config)#service dhcp
+R1(config)#ip dhcp pool Dept-C
+R1(dhcp-config)#network 192.168.4.0 255.255.255.0
+R1(dhcp-config)#default-router 192.168.4.1
+R1(dhcp-config)#dns-server 8.8.8.8
+R1(dhcp-config)#exit
+R1(config)#ip dhcp excluded-address 192.168.4.1 192.168.4.10
+// noshutdown
+R1(config)#interface g0/0
+R1(config)#no shutdown
 </code>