networking:cisco:lab1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
networking:cisco:lab1 [2026/01/13 23:52] – created ilyasanetworking:cisco:lab1 [2026/02/04 00:44] (current) ilyasa
Line 1: Line 1:
-====== Cisco : Test Lab 1 ======+====== Cisco Labs Studi Kasus Desain Jaringan  (BNSP)====== 
 +PT. Jaya Net Persada memiliki 4 bagian, yaitu: 
 +  * Bagian **Pemasaran** 
 +  * Bagian **SDM** 
 +  * Bagian **Teknik** 
 +  * Bagian **Keuangan**
  
 +Direktur perusahaan ingin mengembangkan infrastruktur IT di perusahaannya. Perusahaan tersebut berkantor di sebuah gedung 4 lantai. Setiap bagian harus memiliki jaringan yang terpisah, namun tetap saling terkoneksi (dapat berkomunikasi).
 +
 +Setiap bagian memiliki:
 +  * 1 server
 +  * 1 wireless access point
 +  * Maksimal 60 client (termasuk WiFi)
 +
 +Seluruh jaringan terhubung menggunakan Fast Ethernet dengan kabel UTP Cat.5e.
 +
 +===== Pertanyaan =====
 +
 +Anda sebagai Network Administrator diminta untuk mewujudkan kebutuhan tersebut. Direktur menyediakan perangkat berikut:
 +
 +  - 1 buah Router Cisco 2811
 +  - 4 buah Switch Cisco 2960
 +  - 4 buah Wireless Access Point 802.11b (generic)
 +  - 4 buah Server
 +  - Kabel UTP Cat.5e (4 box)
 +  - 1 blok IP address 192.168.1.0/24
 +  - 8 buah PC
 +  - 4 buah Laptop (Wireless)
 +
 +**Tugas:**
 +  * Buatlah desain jaringan tersebut
 +  * Jelaskan desain jaringan
 +  * Tuliskan alokasi IP address
 +
 +===== Topologi Jaringan =====
 +{{ :networking:cisco:cisco_labs001.png?nolink |}}
 +
 +===== Alokasi Subnet =====
 +
 +^ Subnet ^ Network Address ^ First Host ^ Last Host ^ Broadcast ^
 +| Pemasaran (L1) | 192.168.1.0/26   | 192.168.1.1   | 192.168.1.62  | 192.168.1.63  |
 +| SDM (L2)       | 192.168.1.64/26  | 192.168.1.65  | 192.168.1.126 | 192.168.1.127 |
 +| Teknik (L3)    | 192.168.1.128/26 | 192.168.1.129 | 192.168.1.190 | 192.168.1.191 |
 +| Keuangan (L4)  | 192.168.1.192/26 | 192.168.1.193 | 192.168.1.254 | 192.168.1.255 |
 +
 +Subnet mask: /26 = 255.255.255.192
 +
 +Keterangan:
 +  * IP usable pertama → Gateway
 +  * IP usable kedua → Server (static)
 +
 +===== Konfigurasi =====
 +
 +  * **R1**
 +<code>
 +// vlan10
 +R1(config)#interface f0/0.10
 +R1(config-subif)#encapsulation dot1Q 10
 +R1(config-subif)#ip address 192.168.1.1 255.255.255.192
 +// vlan20
 +R1(config)#interface f0/0.20
 +R1(config-subif)#encapsulation dot1Q 20
 +R1(config-subif)#ip address 192.168.1.65 255.255.255.192
 +// vlan30
 +R1(config)#interface f0/0.30
 +R1(config-subif)#encapsulation dot1Q 30
 +R1(config-subif)#ip address 192.168.1.129 255.255.255.192
 +// vlan40
 +R1(config)#interface f0/0.40
 +R1(config-subif)#encapsulation dot1Q 40
 +R1(config-subif)#ip address 192.168.1.193 255.255.255.192
 +</code>
 +<code>
 +// dhcp L1
 +R1(config)#service dhcp
 +R1(config)#ip dhcp pool pemasaran
 +R1(dhcp-config)#network 192.168.1.0 255.255.255.192
 +R1(dhcp-config)#default-router 192.168.1.1  
 +R1(dhcp-config)#exit
 +R1(config)#ip dhcp excluded-address 192.168.1.1 192.168.1.2 
 +// dhcp L2
 +R1(config)#service dhcp
 +R1(config)#ip dhcp pool SDM      
 +R1(dhcp-config)#network 192.168.1.64 255.255.255.192
 +R1(dhcp-config)#default-router 192.168.1.65
 +R1(dhcp-config)#exit
 +R1(config)#ip dhcp excluded-address 192.168.1.65 192.168.1.64
 +// dhcp L3
 +R1(config)#service dhcp
 +R1(config)#ip dhcp pool teknik   
 +R1(dhcp-config)#network 192.168.1.128 255.255.255.192
 +R1(dhcp-config)#default-router 192.168.1.129
 +R1(dhcp-config)#exit
 +R1(config)#ip dhcp excluded-address 192.168.1.129 192.168.1.130
 +// dhcp L4
 +R1(config)#service dhcp
 +R1(config)#ip dhcp pool keuangan 
 +R1(dhcp-config)#network 192.168.1.192 255.255.255.192
 +R1(dhcp-config)#default-router 192.168.1.193
 +R1(dhcp-config)#exit
 +R1(config)#ip dhcp excluded-address 192.168.1.193 192.168.1.194
 +
 +// noshutdown
 +R1(config)#interface f0/0
 +R1(config)#no shutdown
 +</code>
 +----
 +  * **SWL1**
 +<code>
 +SWL1(config)#vlan 10
 +SWL1(config-vlan)#name pemasara
 +SWL1(config-vlan)#vlan 20
 +SWL1(config-vlan)#name SDM
 +SWL1(config-vlan)#vlan 30
 +SWL1(config-vlan)#name teknik
 +SWL1(config-vlan)#vlan 40
 +SWL1(config-vlan)#name keuangan
 +SWL1(config-vlan)#exit
 +SWL1(config)#
 +SWL1(config)#interface range f0/1-10
 +SWL1(config-if-range)#switchport mode access
 +SWL1(config-if-range)#switchport access vlan 10
 +SWL1(config-if-range)#exit
 +SWL1(config)#
 +SWL1(config)#interface range  g0/1-2
 +SWL1(config-if-range)#switchport mode trunk
 +</code>
 +----
 +  * **SWL2**
 +<code>
 +SWL2(config)#vlan 10
 +SWL2(config-vlan)#name pemasara
 +SWL2(config-vlan)#vlan 20
 +SWL2(config-vlan)#name SDM
 +SWL2(config-vlan)#vlan 30
 +SWL2(config-vlan)#name teknik
 +SWL2(config-vlan)#vlan 40
 +SWL2(config-vlan)#name keuangan
 +SWL2(config-vlan)#exit
 +SWL2(config)#
 +SWL2(config)#interface range f0/1-10
 +SWL2(config-if-range)#switchport mode access
 +SWL2(config-if-range)#switchport access vlan 20
 +SWL2(config-if-range)#exit
 +SWL2(config)#
 +SWL2(config)#interface range  g0/1-2
 +SWL2(config-if-range)#switchport mode trunk
 +</code>
 +
 +  * **SWL3**
 +<code>
 +SWL3(config)#vlan 10
 +SWL3(config-vlan)#name pemasara
 +SWL3(config-vlan)#vlan 20
 +SWL3(config-vlan)#name SDM
 +SWL3(config-vlan)#vlan 30
 +SWL3(config-vlan)#name teknik
 +SWL3(config-vlan)#vlan 40
 +SWL3(config-vlan)#name keuangan
 +SWL3(config-vlan)#exit
 +SWL3(config)#
 +SWL3(config)#interface range f0/1-10
 +SWL3(config-if-range)#switchport mode access
 +SWL3(config-if-range)#switchport access vlan 30
 +SWL3(config-if-range)#exit
 +SWL3(config)#
 +SWL3(config)#interface range  g0/1-2
 +SWL3(config-if-range)#switchport mode trunk
 +</code>
 +
 +  * **SWL4**
 +<code>
 +SWL4(config)#vlan 10
 +SWL4(config-vlan)#name pemasara
 +SWL4(config-vlan)#vlan 20
 +SWL4(config-vlan)#name SDM
 +SWL4(config-vlan)#vlan 30
 +SWL4(config-vlan)#name teknik
 +SWL4(config-vlan)#vlan 40
 +SWL4(config-vlan)#name keuangan
 +SWL4(config-vlan)#exit
 +SWL4(config)#
 +SWL4(config)#interface range f0/1-10
 +SWL4(config-if-range)#switchport mode access
 +SWL4(config-if-range)#switchport access vlan 40
 +SWL4(config-if-range)#exit
 +SWL4(config)#
 +SWL4(config)#interface range  g0/1-2
 +SWL4(config-if-range)#switchport mode trunk
 +</code>
  • networking/cisco/lab1.1768323159.txt.gz
  • Last modified: 2026/02/01 21:08
  • (external edit)